EN
Selecting an appropriate surface finish is essential as colors and patterns for any B2B customer who purchase quartz stone to be installed in their hotel interiors, home or commercial building spaces. It can impact its appearance, durability and maintenance requirements as well as where it's applied. The different types of polishes, matte, honed and leathered finishes have been explained below:
Polished Finish: High Gloss and Maximum Reflectivity
The most familiar and most often utilized finish is a polished finish of quartz stone. This surface finish is manufactured by grinding down the surface with very fine abrasives to produce an intensely glossy, mirror-like finish. The appearance of quartz stone color and pattern is heightened; quartz stone exhibits a luminous and upscale impression. Stain and fluid penetrations cannot occur through the clean polished surface. The ideal place to incorporate this polish finish is in a sophisticated and elegant finish at your hotel lobby, kitchen counter, bathroom vanity top, or reception areas. However, one may need to wipe fingerprints, smudges and water spots more often.
Matte Finish: Subtle Elegance with Low Sheen
Also known as satin finish or honed finish, a matte finish has a velvet-like soft look with either no shine at all or very little. It is formed when the polishing phase of quartz stone surfaces is halted before it achieves the high-gloss finish discussed above. This type of finish presents well in contemporary and modern designs; it has a natural and neat look. In contrast, fingerprints, water spots and smudge marks on matte finish quartz stone surfaces will be much less conspicuous compared to the polished ones. Because of this, it is suitable for use in areas where usage is more frequent, for instance a rental housing property, hotel reception desk, and restaurant table and even more recommended for flooring and bathrooms as it shows better slip resistance properties. The main concern about the matte finish is that it is not as easily maintained as polished surfaces, since dust tends to accumulate into the slight recesses in the texture of the finish. Daily cleaning with mild soap and water should be sufficient to maintain freshness.
Honed Finish: Smooth, Flat, and Natural
The honed finish is between a matte and polished finish, presenting a smooth, flat surface with uniform low sheen all across the stone. The true color and pattern of the stone is expressed with no reflection which distracts from the presentation as the grinding stops short of over-polishing. Good slip resistance, which is a quality highly recommended for floors and stair treads, as well as for all commercial uses. A honed finish on fireplace surrounds and feature walls gives a touch of discreet luxury and elegance. This finish shows wear and tear more obviously than a polished one and may stain more easily than fully polished surfaces. However, quartz remains highly stain-resistant regardless of its finish. It also cleans up with mild soap and water but any oil-based stain must be cleaned up promptly.
Leathered Finish: Textured and Durable
This finish is a cutting edge surface finish for quartz stones. Once honing is complete, diamond-tipped brushes are utilized to give the stone a slightly rough, low-gloss surface finish. The textured surface feels soft and similar to leather, and fingerprints, water spots and scratch marks are much better concealed than those on various other finishes, making it appear quite unlike any normal quartz stone surface finish. It works incredibly well in high-traffic, high-usage environments such as hotel reception desks, bar counters in restaurants or bars, and rental property countertops. Moreover, the textured surface is visually striking. It is extremely wear-resisting, thus it may perform outstandingly well under high use. Cleaning is similar to other surface finishes and involves using mild soap and water. One consideration here is the limitations imposed by the style-the leathered finish is not the ideal choice for all interiors; contemporary and rustic styles seem best suited to the finish.
Summary
The selection of an appropriate quartz stone surface finish is dependent on how it is to be used, the preferences of the customer and the overall interior design goals that must be reached. While the polished finish is perfect for kitchen and bathroom use to project a sense of luxury, matte and honed finishes are better choices for busy commercial premises as they have lower reflection and hide fingerprints and ordinary marks quite well. The leathered finish provides an exceptional level of durability with its textured surface that exudes a more contemporary character. Xiamen Nishi Group Co., Ltd. Provides the most premium quality quartz stone surfaces by using a state-of-the-art production process available in Polished, Matte, Honed and Leathered finishes, in addition to which we process Marble, Granite, Travertine, Artificial Marble, Luxury Stone, Stone Monuments, carvings, handicrafts, Nano Stone and Basalt products. You may get in touch with us at your own convenience for further queries regarding our finishes and ordering of samples.